What is plasma cutter

What is plasma cutting machine
Plasma cutting machine is a tool that is relatively easy to use to cut steel and metal, electrically - conductive other blade will work with the electric arc pressure and gas compressors. weather. The electric arc ionizes the gas from power through a nozzle, creating a concentration of R. plasma cutter at the end of Arc contact with work surface to heat the melting range of less than 1 / 16 "(1.6mm) wide force of the flow of plasma, and then blow out of the area on the specimen actually failed,. Create a clean and fair. Cut with little or no waste. R. Plasma nozzle travels at speeds of up to 20,000 feet per second, and at high temperatures to 30,000 degrees Fahrenheit (16,600 Celsius)!

Light, plasma cutter, portable uses 110 volts, with output of about 12-35 amp facilitate the exercise of these machines often feature on-board air compressors. Larger blades are 220-volt systems that export between 50 and 80 amp models can be used in mobile phones cut any conductive metal up to ½ inch thick (1.25cm) at the time. Plasma cutters can cut through 2 inch Industrial (5cm) of metal.

One of the advantages of using a plasma cutter to the outside surface of the metal cutting is still quite cold; This will prevent damage and color variations that can occur with the blade flame some other heat affected zone (HAZ) also allows the use of a template for cutting precise curves. Plasma cutting up to five times faster than Torches traditional and non-flammable gases requiring high Plasma cutter also works a lot better and is able to penetrate metal gougers quickly and accurately.

Despite the advantages of the plasma cutter has some flaws. Electrode of the cutting nozzle and sometimes need to change frequently, which adds to the cost of operation. Material is not conductive, such as wood or plastic can not be cut with a plasma cutter. The second obstacle is also one of the plasma arc cutting corners leaves usually 4-6 degrees on the cutting edge; Although this view is almost invisible in some materials are noticeable on a piece of thick Torches Fuel gas is better than the plasma cutter for steel thickness.